<output id="k9wji"><dd id="k9wji"><tt id="k9wji"></tt></dd></output>
  1. <object id="k9wji"></object>
  2. <output id="k9wji"></output>

  3. <code id="k9wji"></code>

  4. <thead id="k9wji"></thead>
    Hm-20 series ultrasonic generator

    Hm-20 series ultrasonic generator

    Hm-20 series ultrasonic generator system

    -Synchronous automatic frequency tracking system

    -Voltage FEEDBACK function

    -Phrase "function

    -SOFT START function

    Consultation
    • Details
    • Parameter

      一、User instructions

      1、Power on screen: power on, display "power on" screen

      6370103417131250002152352.png


      2、Running screen: power on and start up. After three seconds, jump to the "running" screen

      6370103417951562507058681.png

      (1)Nine buttons:

      a、START/STOP switch:

            Press and hold the "start-stop switch" button, ultrasonic wave, "start-stop switch" button becomes green;

            Loosen the "start-stop switch" button, the ultrasonic stops, and the "start-stop switch" button turns red;

      b、RESET button:

             When the device is stopped, press the "reset" button to reset the device and remove the alarm.

      c、Timer ON/OFF: when the device is stopped,

            Press the "timing switch" button, the "timing switch" button turns green, and the timing function is on;

            Press the "timing switch" button again, the "timing switch" button turns red, and the timing function is closed;

      d、Increase amplitude: when the device is stopped, press the "increase amplitude" button to increase the amplitude by 2%.

      e、Decrease amplitude: when the device is stopped, press the "decrease amplitude" button to reduce the amplitude by 2%.

            The amplitude is set from 10% to 100%.

      f、Increase timing time:

           When the device is stopped, press the "increase timing time" button to increase timing time by 0.1 seconds.

      g、Reduce timing time:

            When the device is stopped, press the "reduce timing time" button to reduce the timing time by 0.1 seconds: the setting range of timing time is 0.1 seconds to 9.9 seconds;

      h、Increase cooling time:

            When the device is stopped, press the "increase cooling time" button to increase the cooling time by 0.1 seconds.

      i、Reduce cooling time:

           When the device is stopped, press the "reduce cooling time" button to reduce the cooling time by 0.1 seconds.

           The cooling time ranges from 0.1 SEC to 9.9 SEC.

      (2)Five texts: Freq, Power, Amp, Timer and Cool.

      (3)An ALARM indicator:

                Unconnected transducers, abnormal frequencies and power overloads will trigger an alarm, and the "alarm" indicator will turn yellow.

                 And twinkle.

      The data for setting amplitude, timing time and cooling time and the status of the timing switch are automatically modified

      Save, the next boot still shows the saved data and status.

      3、Automatic screen saver function: when the touch screen is not operated for 120 seconds, the backlight of the touch screen is automatically turned off.


                 







            



            



      Serial numberThe weight of the(kg)

      Goods details

      Product model

      HM-3510S

      power(kw)

      1.2

      frequency(kHz)

      35、30

      voltage

      220V

      190422-01


      size(L*W*H)(mm)

      480*180*100

      6.5


    老司机永久免费视频网站
    <output id="k9wji"><dd id="k9wji"><tt id="k9wji"></tt></dd></output>
    1. <object id="k9wji"></object>
    2. <output id="k9wji"></output>

    3. <code id="k9wji"></code>

    4. <thead id="k9wji"></thead>